Home > Switches > Installation Guides > End of sale > MS22 Series (EOS) Installation Guide

MS22 Series (EOS) Installation Guide

On Aug 5, 2013, Cisco Meraki announced the end-of-sale date for the MS22 series switch will be Apr 26, 2014.  The end-of-support date is Apr 26, 2021.

Read more about our Product End-of-Life (EOL) Policy.

Models

Model number
Description
MS22 Layer-2 24-port GigabitEthernet switch with 4 SFP interfaces
MS22P Layer-2 24-port PoE GigabitEthernet switch with 4 SFP interfaces

 

Package contents

In addition to the MS, the following are provided:

Rack Mount Kit includes:

  • US 12-24 mounting screws and cage nuts, 5 of each
  • INTL M5 mounting screws and cage nuts, 5 of each
  • INTL M6 mounting screws and cage nuts, 5 of each
  • Mounting washers

MS22/P Series front panel

Ports and Status Indicators

The MS uses LEDs to inform the user of the device's status. When the device powers on, all the Internet LEDs flash twice. Additional functions are described below, from left to right.

Item

Function

LED Status

Meaning

1

Power

Solid orange

Switch is unable to connect to the Meraki cloud

 

 

Flashing orange

Firmware upgrade in process

 

 

Solid green

Switch is fully operational and connected to the Meraki cloud

    Off Switch does not have power
2 Restore N/A Restore button to clear switch IP and local configuration settings

3

Switch Ports

Off

No client connected

 

 

Solid orange

10/100 Mbps (1000 Mbps on SFP+, MS42/P Only)

 

 

Solid green

1000 Mbps (10000 Mbps on SFP+, MS42/P Only)

In addition, there is a RESTORE button available on the front panel.

Insert a paper clip if a restore is required.

  • A brief, momentary press: To delete a downloaded configuration and reboot.
  • Press and hold for more than 10 sec: To force the unit into a full factory restore.

 

MS22/P Series back panel

Additional functions on the back panel are described below, from left to right.

Power input The MS comes standard with US power cord. EU/UK/AU power cords may be ordered separately.

Equipment is to be used only in a restricted access location and installed/operated only by trained service personnel.

 

Mounting hardware

The mounting hardware includes a rack mount kit for standard 1U racks. When installing the device, make sure that there is sufficient space between the rear of the rack and other obstacles to ensure adequate airflow.

You must to post a comment.
Last modified
12:26, 8 Dec 2016

Tags

This page has no custom tags.

Classifications

This page has no classifications.

Article ID

ID: 4445

Contact Support

Most questions can be answered by reviewing our documentation, but if you need more help, Cisco Meraki Support is ready to work with you.

Open a Case