Home > Switches > Layer 3 Switching > Common DHCP Options

Common DHCP Options

The Dynamic Host Configuration Protocol (DHCP) provides an administrator with a framework for passing configurations to DHCP clients on a network. DHCP Options are added configuration parameters that a DHCP server can hand out to DHCP clients. When the DHCP server receives the DHCP Request message from the client, the server (typically) responds by sending a DHCP ACK packet to the client. At this time, the server will forward any configured options within the DHCP ACK packet.

Common Options

Option 4 (Time Server)

This option is used to specify the time server available to the client. This is also related to the Time zone offset option.

 

Option 12 (Hostname)

This option is used to carry the “hostname” portion of a node’s Fully Qualified Domain Name.

For example, “mail” of mail.meraki.com.

 

Option 15 (Domain Name)

This option is used to carry the “domain” portion of a node’s Fully Qualified Domain Name. For example, “meraki.com” of mail.meraki.com.

 

Option 42 NTP servers

This option carries the NTP servers used on the network.

 

Option 66 (TFTP Server)

This option is used to carry the IP address or hostname.

 

Option 81 (Dynamic DNS updates)  

This option is used to enable dynamic DHCP updates on clients.

Note: This option is server dependent, applies to Windows Server 2003 and windows server 2008

 

Option 82 (DHCP Relay Agent)

This option is used to carry other sub options for server side dhcp relay server information

You must to post a comment.
Last modified
10:06, 3 Feb 2015

Tags

This page has no custom tags.

Classifications

This page has no classifications.

Article ID

ID: 2289

Contact Support

Most questions can be answered by reviewing our documentation, but if you need more help, Cisco Meraki Support is ready to work with you.

Open a Case