Home > Switches > Installation Guides > MS350 Series Installation Guide

MS350 Series Installation Guide

Model number

Description

MS350-24

Layer-3 24-port gigabit Ethernet switch with 4 SFP+ interfaces, hot-swappable power supplies and hot-swappable fans

MS350-24P

Layer-3 24-port gigabit Ethernet PoE switch with 4 SFP+ interfaces, hot-swappable power supplies and hot-swappable fans

MS350-48

Layer-3 48-port Physically Stacking gigabit Ethernet switch with 4 SFP+ interfaces, hot-swappable power supplies and hot-swappable fans

MS350-48LP

Layer-3 48-port gigabit Ethernet 370W PoE switch with 4 SFP+ interfaces, hot-swappable power supplies and hot-swappable fans

MS350-48FP

Layer-3 48-port gigabit Ethernet 740W PoE switch with 4 SFP+ interfaces, hot-swappable power supplies and hot-swappable fans

MS350-24X Layer-3 16-port gigabit Ethernet and 8-port multigigabit 740W UPoE switch with 4 SFP+ interfaces, hot-swappable power supplies and hot-swappable fans

Package contents

In addition to the MS switch, the following are provided (mounting kit provided with 1U models only):

Rack Mount Kit includes:

  • US 12-24 mounting screws and cage nuts, 5 of each
  • INTL M5 mounting screws and cage nuts, 5 of each
  • INTL M6 mounting screws and cage nuts, 5 of each
  • Mounting washers
Note: MS350 also comes with a half meter stack cable.
If using a 640WAC or 1025WAC power supply, it will require and be provided with a C15 power cable.

MS350-24 Series front panel

MS350-48 Series front panel


MS350-24x Series front panel

Ports and Status Indicators

The MS uses LEDs to inform the user of the device's status. When the device powers on, all the Internet LEDs flash twice. Additional functions are described below, from left to right.

Item

Function

LED Status

Meaning

1

Power

Solid orange

Switch is unable to connect to the Meraki cloud

   

Flashing green

Firmware upgrade in process

   

Solid green

Switch is fully operational and connected to the Meraki cloud

   

Off

Switch does not have power

2

Switch Ports

Off

No client connected

   

Solid orange

10/100 Mbps (1000 Mbps on SFP+)

   

Solid green

1000/2500/5000/10000 Mbps (10000 Mbps on SFP+)

In addition, there is a RESTORE button available on the back panel.

Insert a paperclip if a restore is required.

  • A brief, momentary press: To delete a downloaded configuration and reboot.

  • Press and hold for more than 10 sec: To force the unit into a full factory restore.

MS350 Series back panel

Item

Function

LED Status

Meaning

1

Restore

N/A

Restore button to clear switch IP and local configuration settings

2

Management Interface

Green

Connected, used for easy access to the local status page

3

Stack Ports

N/A

Stack Cables are connected here

4

Redundant Fans

Green

Active and operational

5

Redundant Power Supplies

Green

Active and functional power supplies

Power input

Power cords may be ordered separately.

Equipment is to be used only in a restricted access location and installed/operated only by trained service personnel.

Bringing your Stack Online

MS350 switches can be connected in a physical stack using dedicated stacking ports and cables. Configuration steps and additional information about stacking can be found here.
You must to post a comment.
Last modified
14:47, 6 Sep 2017

Tags

This page has no custom tags.

Classifications

This page has no classifications.

Article ID

ID: 4635

Contact Support

Most questions can be answered by reviewing our documentation, but if you need more help, Cisco Meraki Support is ready to work with you.

Open a Case

Ask the Community

In the Meraki Community, you can find answers provided by fellow Meraki users and ask questions of your own.

Visit the Community