Skip to main content
Cisco Meraki

Cisco+ Secure Connect Onboarding

If you don’t have a Meraki account or an Umbrella account

1. Customer receives the welcome email.
A1.png
2. Click 'Claim new Umbrella account' shown in the welcome email under step 1 - 'Set up Umbrella', enter the admin email and click 'RESET PASSWORD'.
A2.1.png
A2.2.png
3. Check your inbox, click this link to reset your password.
A3.png
4. Enter your email and password to setup the Umbrella account.
A4.1.png
A4.2.png
5. Now we have successfully setup the Umbrella account, let’s go to step 2 set up Meraki, click Create New Meraki Account. 
6. Select your region.
A6.png
7. Provide necessary attributes listed below and click Create account. 
A7.png
8. Go to your inbox and confirm the email address 
A8.1.png
A8.2.png
9. Once you confirm the email, you will see below page. Now head back to the inbox and click step 3 Connect Meraki to Umbrella.
A9.png
10. Click create Umbrella API keys, it will open a new tap and direct you to the Umbrella login page, accept the Term of Service to continue provision.
A10.1.png
A10.2.png
A10.3.png
11. Skip below steps for now and click START USING CISCO UMBRELLA.
A11.1.png
A11.2.png
A11.3.png
12. On the left panel, Go to Admin > API Keys, expand Umbrella Network Devices and click Generate Token. (Notice: Don’t forget to copy & paste your Key and Secret because for security reasons, your secret will only be displayed once) 
A12.1.png
A12.2.png
13. Copy the Umbrella Network Devices Key and Secret to Cisco Plus Secure Connect page, click Check and Continue. 
A13.png
14. Repeat above steps to finish Umbrella Reporting Credentials and Umbrella Management Credentials. 
A14.1.png
A14.2.png
A14.3.png
A14.4.png
A14.5.png
A14.6.png
15. Click Finish and now you have successfully provisioned your Cisco Plus Secure Connect and ready to go for detailed configurations. 
A15.1.png
A15.2.png

If you don’t have a Meraki account but have an Umbrella account

1. Customer received the welcome email. 
B1.png
2. Skip Step 1 since you have already had an Umbrella account. 
3. Go to step 2 set up Meraki, click Create New Meraki Account. 
4. Select your region.
B4.png
5. Provide necessary attributes listed below and click Create account. 
B5.png
6. Go to your inbox and confirm the email address.
B6.1.png
B6.2.png
7. Once you confirm the email, you will see below page. Now head back to the inbox and click step 3 Connect Meraki to Umbrella.
B7.png
8. Click create Umbrella API keys, it will open a new tap and direct you to the Umbrella login page.
B8.1.png
B8.2.png
9. On the left panel, Go to Admin > API Keys, expand Umbrella Network Devices and click Generate Token. (Notice: Don’t forget to copy & paste your Key and Secret because for security reasons, your secret will only be displayed once) 
B9.1.png
B9.2.png
10. Copy the Umbrella Network Devices Key and Secret to Cisco Plus Secure Connect page, click Check and Continue.
A13.png
11. Repeat above steps to finish Umbrella Reporting Credentials and Umbrella Management Credentials. 
A14.1.png
A14.2.png
A14.3.png
A14.4.png
A14.5.png
A14.6.png
12. Click Finish and now you have successfully provisioned your Cisco Plus Secure Connect and ready to go for detailed configurations. 
A15.1.png
A15.2.png

If you have a Meraki account but don't have an Umbrella account

1. Customer received the welcome email.
A1.png
2. Click Claim new Umbrella account shown in the welcome email under step 1 set up Umbrella, enter the admin email and click RESET PASSWORD.
A2.1.png
A2.2.png
3. Check your inbox, click this link to reset your password.
A3.png
4. Enter your email and password to setup the Umbrella account.
A4.1.png
A4.2.png
5. Now we have successfully setup the Umbrella account, since you had a Meraki account. Skip step 2 and go for step 3, click Connect Meraki to Umbrella
C5.png
6. Use your Meraki Credential to login, and it will re-direct you to below page. Click create Umbrella API keys, it will open a new tap and direct you to the Umbrella login page, accept the Term of Service to continue provision.
A10.1.png
A10.2.png
A10.3.png
7. Skip below steps for now and click START USING CISCO UMBRELLA.
A11.1.png
A11.2.png
A11.3.png
8. On the left panel, Go to Admin > API Keys, expand Umbrella Network Devices and click Generate Token. (Notice: Don’t forget to copy & paste your Key and Secret because for security reasons, your secret will only be displayed once) 
A12.1.png
A12.2.png
9. Copy the Umbrella Network Devices Key and Secret to Cisco Plus Secure Connect page, click Check and Continue
A13.png
10. Repeat above steps to finish Umbrella Reporting Credentials and Umbrella Management Credentials
A14.1.png
A14.2.png
A14.3.png
A14.4.png
A14.5.png
A14.6.png
11. Click Finish and now you have successfully provisioned your Cisco Plus Secure Connect and ready to go for detailed configurations. 
A15.1.png
A15.2.png
  • Was this article helpful?