Skip to main content
Cisco Meraki

Decoding the Meraki Go Hardware LED Lights

Each Meraki Go device is equipped with a multi-color light that can be seen on the top right of each device to provide an easy at-a-glance status.

If you don’t see any light emitted, please ensure that your Meraki Go device is properly powered with either the included AC adapter, or from a "power over ethernet" (PoE) supported ethernet port.

Access Point Color States

These can also be found within the Meraki Go app.

LED Color Description
LEDColors_Booting@2x.png Orange

Booting
Your access point is powered on and starting up.

LEDColors_Uplink@2x.png Blinking Orange

Cannot find uplink

Your access point is unable to find a way to the internet. This can occur when there are issues with your connection to your ISP, or if your network is misconfigured.

LEDColors_Connecting@2x.png Rainbow

Connecting

Your access point is initializing and trying to connect to the internet.

LEDColors_Upgrading@2x.png Blinking blue

Updating

Your access point is updating to the latest firmware. Firmware updates include new features and keep your network secure.

LEDColors_Online@2x.png Green

Online

Your access point is online and ready for device to connect. It’s good to Go!

Switch Color States

These can also be found within the Meraki Go app.

LED Color Description
LEDColors_Connecting@2x.png Rainbow

Connecting

Your switch is initializing and trying to connect to the internet.

LEDColors_Booting@2x.png Orange

Cannot find uplink

Your switch is unable to find a way to the internet. This can occur when there are issues with your connection to your ISP, or if your network is misconfigured.

whiteblink.png Blinking white

Updating

Your switch is updating to the latest firmware. Firmware updates include new features and keep your network secure.

white.png White

Online

Your switch is online and ready for device to connect. It’s good to Go!

Security Appliance Color States

These can also be found within the Meraki Go app.

LED Color Description
LEDColors_Booting@2x.png Orange

Booting
Your security appliance is powered on and starting up.

LEDColors_Connecting@2x.png Rainbow

Connecting

Your security appliance is initializing and trying to connect to the internet.

whiteblink.png Blinking white

Updating

Your security appliance is updating to the latest firmware. Firmware updates include new features and keep your network secure

white.png White

Online

Your security appliance is online and ready for device to connect. It’s good to Go!

 


LED Locations

Indoor WiFi Access Point

Outdoor WiFi Access Point

GR10 LED Location documentation.png GR20 LED Location documentation.png

 

  • Was this article helpful?