Home > Security Appliances > Monitoring and Reporting > Primary Uplink Status and Ethernet Port Carrier Change Events

Primary Uplink Status and Ethernet Port Carrier Change Events

Table of contents
No headers

When the primary uplink of an MX appliance fails over, a 'Primary uplink status' event type will be logged under Monitor > Event log. The "Details" of the event show the new primary uplink. 

 

  • uplink: 0 - indicates Internet1 is being used.
  • uplink: 1 - indicates Internet2 is being used.
  • uplink: 2 - indicates Cellular is being used. 

 

When the MX appliance experiences a Ethernet port state change, an 'Ethernet port carrier change' event type will be logged under Monitor > Event log. The details of this event define the type of state change and port that was affected.  For example, 'device: lan0, carrier: false' means LAN1 on the Meraki had a 'down' event and the Ethernet link was lost. 

 

The MX uses heuristic detection to determine if an internet link is down. If the Ethernet link state is up but the MX is unable to ping internet hosts, resolve DNS names of Internet hosts or ARP entries for the default gateway, it will trigger a link failover.

You must to post a comment.
Last modified
13:25, 31 Aug 2017

Tags

This page has no custom tags.

Classifications

This page has no classifications.

Article ID

ID: 1442

Contact Support

Most questions can be answered by reviewing our documentation, but if you need more help, Cisco Meraki Support is ready to work with you.

Open a Case

Ask the Community

In the Meraki Community, you can find answers provided by fellow Meraki users and ask questions of your own.

Visit the Community