Home > Security Appliances > Z1 Quick Start

Z1 Quick Start

Quick Start

If you just want to get started without reading any more, follow these basic steps.

  1. Unpack and mount your Z1 (desktop or wall mount) and power it on.
  2. Make sure the Z1 can get a DHCP lease from the WAN connection / ISP modem. 
  3. Plug the WAN / Internet port into the WAN connection / ISP modem using the provided patch cable.
  4. After powering on, the Z1 may need to download the latest firmware image from the cloud. While upgrading, the power LED will flash. When the Z1 has fully checked into the Cisco Meraki Dashboard, the LED become solid.
  5. Login to http://dashboard.meraki.com and create a new network. Enter in the serial number of your Z1 (found on the bottom of the unit). This will create a new teleworker gateway network to begin working with your Z1.
  6. You’re done!

If you need to set up a static IP address for the WAN connection, please read the Z1 Installation Guides.

You must to post a comment.
Last modified
18:58, 29 Feb 2016

Tags

Classifications

This page has no classifications.

Explore Meraki

You can find out more about Cisco Meraki on our main site, including information on products, contacting sales and finding a vendor.

Explore Meraki

Contact Support

Most questions can be answered by reviewing our documentation, but if you need more help, Cisco Meraki Support is ready to work with you.

Open a Case

Ask the Community

In the Meraki Community, you can keep track of the latest announcements, find answers provided by fellow Meraki users and ask questions of your own.

Visit the Community