Skip to main content
Cisco Meraki Documentation

Cisco Meraki AP not showing on MS Switch LLDP Column

Cisco Meraki MS Switches feature the ability to read LLDP data from devices. This can be a convenient way to know what hardware is attached to the switch. 

Attached hardware must support LLDP communication.

Cisco Meraki Enterprise AP's support LLDP and will show up in the LLDP column of the MS Dashboard. 


In some scenarios, the LLDP column may not populate with MR connection information. Please contact Meraki Enterprise Support if this happens in your network.  

For more information on LLDP please click here.

  • Was this article helpful?